[sciencedmz] {Disarmed} RE: Science DMZ - installation requirements checkpoint
Straight, John E (John)
john.straight at alcatel-lucent.com
Tue May 7 14:06:33 PDT 2013
Gentlemen,
We have cancelled the Professional Services Resource for next week. Please advise on a couple of alternative installation start dates that work? Keep in mind that whatever date we decide on we must keep as these installation resources are difficult to scheduled. Thanks.
John Straight
(310) 944-5675
________________________________
From: Kent McKelvey [mailto:mckelvey at mail.sdsu.edu]
Sent: Tuesday, May 07, 2013 1:18 PM
To: Christopher Paolini
Cc: Witt, Brian K (Brian); Straight, John E (John); network; Rich Pickett; sciencedmz at attila.sdsu.edu
Subject: Re: [sciencedmz] Science DMZ - installation requirements checkpoint
I sen an invite to meet on Monday 5/13 at 10am.
-Kent
On Tue, May 7, 2013 at 10:30 AM, Christopher Paolini <paolini at engineering.sdsu.edu<mailto:paolini at engineering.sdsu.edu>> wrote:
Hi Kent,
Please let me know when you are available to meet to discuss your
concerns with the network design so we can prepare for the
Alcatel-Lucent visit. The most important thing right now is to get the
fiber connectivity between the C4900M switch in Admin 12 and the OS10K
in NLS-29E so I can configure BGP Peering on the OS10K and test
connectivity to the CENIC HPR network. Anything you and/or Rich can do
to get this connectivity operational would be most helpful.
Thanks Kent,
Chris
Kent McKelvey <mckelvey at mail.sdsu.edu<mailto:mckelvey at mail.sdsu.edu>> wrote:
> Hi,
> After reviewing things with my group. There are to many questions that
> need to be answered to be fully prepared for the install by the 13th.
> TNS will need to meet with Chris to finalize the details for the
> design. I think it will take us a week or two to get prepared. When
> is the next date Alcatel would be be available the installation?
> -Kent
>
> On Mon, May 6, 2013 at 12:19 PM, Christopher Paolini
> <paolini at engineering.sdsu.edu<mailto:paolini at engineering.sdsu.edu>> wrote:
>
> Thanks Brian. I installed the 40GE NI module in slot 5. I also
> spoke
> with Bob Osborn and he is going to work on rack mounting the two
> OS6900s
> and connecting SMF to the SFP-10G-LR ports 1 and 2 in the NI slot 1
> module that connect back to X2-LR GBICS in Te1/2 and Te1/3 of the
> CENIC
> C4900M switch sd-csu-sw-3 in Admin 12.
> Thanks,
> Chris
> Witt, Brian K (Brian) <brian.witt at alcatel-lucent.com<mailto:brian.witt at alcatel-lucent.com>> wrote:
> > Hi John-
> >
> > Any NI in any NI slot is ok, there are no NI-Slot restrictions.
> >
> > Best Regards,
> >
> > Brian Witt
> >
> >
> > -----Original Message-----
> > From: Straight, John E (John)
> > Sent: Monday, May 06, 2013 8:02 AM
> > To: Christopher Paolini
> > Cc: sciencedmz at attila.sdsu.edu<mailto:sciencedmz at attila.sdsu.edu>; Witt, Brian K (Brian)
> > Subject: RE: Science DMZ - installation requirements checkpoint
> >
> > Chris,
> >
> > I don't believe there would be any issues placing the 40GE NI
> Module in Slot 5 but I'll defer to Brian Witt?
> >
> > John Straight
> > (310) 944-5675<tel:%28310%29%20944-5675>
> >
> > -----Original Message-----
> > From: Christopher Paolini [mailto:paolini at attila.sdsu.edu<mailto:paolini at attila.sdsu.edu>]
> > Sent: Sunday, May 05, 2013 11:44 AM
> > To: Straight, John E (John)
> > Cc: sciencedmz at attila.sdsu.edu<mailto:sciencedmz at attila.sdsu.edu>; Witt, Brian K (Brian)
> > Subject: Re: Science DMZ - installation requirements checkpoint
> >
> >
> > Thanks John. I sent revision A to everyone, but Kent and his
> staff need to add their comments and send you an updated revision B.
> Quick
> > question: I have the three 10GE NI modules in slots 1,2,3 of the
> OS10K.
> > Is it OK if I place the 40GE NI module in slot 5?
> > Thanks,
> > Chris
> >
> > Straight, John E (John) <john.straight at alcatel-lucent.com<mailto:john.straight at alcatel-lucent.com>> wrote:
> >
> > > Chris,
> > >
> > > Thanks for completing the Installation Requirements Document. I
> have yet to hear back from AT&T on the OmniVista delivery but will
> check again tomorrow morning.
> > >
> > > John Straight
> > > (310) 944-5675<tel:%28310%29%20944-5675>
> > >
> > > -----Original Message-----
> > > From: Christopher Paolini [mailto:paolini at attila.sdsu.edu<mailto:paolini at attila.sdsu.edu>]
> > > Sent: Saturday, May 04, 2013 6:14 PM
> > > To: sciencedmz at attila.sdsu.edu<mailto:sciencedmz at attila.sdsu.edu>; Witt, Brian K (Brian)
> > > Cc: Straight, John E (John)
> > > Subject: Re: Science DMZ - installation requirements checkpoint
> > >
> > >
> > > Kent, Bob, Tony, and Gene:
> > >
> > > Kent: I have attached revision A of the LAN Implementation Form.
> My answers are given in red font. Please go through my answers and
> add additional detail as you deem appropriate. I rack mounted the
> OS10K Friday (see Figure 1).
> > >
> > > Bob: I'd like to work with you on Monday to mount one OS6900 in
> CSL-121A and one OS6900 in EBA-111. I met Eric Frost and he has
> given us permission to mount an OS6900 in CSL-121A. We need to
> ensure water doesn't leak onto the OS6900 through the fiber conduit
> in the event of a rainstorm (Eric mentioned this issue). We also
> need to connect SMF to the SFP-10G-LR ports 1 and 2 in the NI slot 1
> module (see Figure 2) that connect back to X2-LR GBICS in Te1/2 and
> Te1/3 of the CENIC C4900M switch sd-csu-sw-3 in Admin 12.
> > >
> > > Tony: Network MailScanner warning: numerical links are often
> malicious: 130.191.49.0/24<http://130.191.49.0/24> is now associated with Autonomous System
> Number 64760.
> > >
> > > Gene: I have included an updated Science DMZ Network Internal
> Firewall Ruleset in section 5.
> > >
> > > Thanks everyone,
> > >
> > > Chris
> > >
> > >
> > > --
> > > This message has been scanned for viruses and dangerous content
> by MailScanner, and is believed to be clean.
> > >
> > >
> > > --
> > > This message has been scanned for viruses and dangerous content
> by
> > > MailScanner, and is believed to be clean.
> > >
> > >
> >
> > --
> > This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
> >
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> _______________________________________________
> sciencedmz mailing list
> sciencedmz at engineering.sdsu.edu<mailto:sciencedmz at engineering.sdsu.edu>
> http://attila.sdsu.edu/mailman/listinfo/sciencedmz
>
> --
> Kent McKelvey
> Director, Telecommunications and Network Services
> Office: 619-594-3245<tel:619-594-3245>
> E-mail: kent at sdsu.edu<mailto:kent at sdsu.edu>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
Kent McKelvey
Director, Telecommunications and Network Services
Office: 619-594-3245
E-mail: kent at sdsu.edu<mailto:kent at sdsu.edu>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://engineering.sdsu.edu/pipermail/sciencedmz/attachments/20130507/c3c3c8c0/attachment.htm>
More information about the sciencedmz
mailing list