[sciencedmz] {Disarmed} Re: Science DMZ - installation requirements checkpoint

Kent McKelvey mckelvey at mail.sdsu.edu
Tue May 7 13:17:47 PDT 2013


I sen an invite to meet on Monday 5/13 at 10am.

-Kent



On Tue, May 7, 2013 at 10:30 AM, Christopher Paolini <
paolini at engineering.sdsu.edu> wrote:

>
> Hi Kent,
>
> Please let me know when you are available to meet to discuss your
> concerns with the network design so we can prepare for the
> Alcatel-Lucent visit.  The most important thing right now is to get the
> fiber connectivity between the C4900M switch in Admin 12 and the OS10K
> in NLS-29E so I can configure BGP Peering on the OS10K and test
> connectivity to the CENIC HPR network.  Anything you and/or Rich can do
> to get this connectivity operational would be most helpful.
>
> Thanks Kent,
>
> Chris
>
> Kent McKelvey <mckelvey at mail.sdsu.edu> wrote:
>
> >    Hi,
> >    After reviewing things with my group.  There are to many questions
> that
> >    need to be answered to be fully prepared for the install by the 13th.
> >    TNS will need to meet with Chris to finalize the details for the
> >    design.  I think it will take us a week or two to get prepared.   When
> >    is the next date Alcatel would be be available the installation?
> >    -Kent
> >
> >    On Mon, May 6, 2013 at 12:19 PM, Christopher Paolini
> >    <paolini at engineering.sdsu.edu> wrote:
> >
> >      Thanks Brian.  I installed the 40GE NI module in slot 5.  I also
> >      spoke
> >      with Bob Osborn and he is going to work on rack mounting the two
> >      OS6900s
> >      and connecting SMF to the SFP-10G-LR ports 1 and 2 in the NI slot 1
> >      module that connect back to X2-LR GBICS in Te1/2 and Te1/3 of the
> >      CENIC
> >      C4900M switch sd-csu-sw-3 in Admin 12.
> >      Thanks,
> >      Chris
> >      Witt, Brian K (Brian) <brian.witt at alcatel-lucent.com> wrote:
> >      > Hi John-
> >      >
> >      > Any NI in any NI slot is ok, there are no NI-Slot restrictions.
> >      >
> >      > Best Regards,
> >      >
> >      > Brian Witt
> >      >
> >      >
> >      > -----Original Message-----
> >      > From: Straight, John E (John)
> >      > Sent: Monday, May 06, 2013 8:02 AM
> >      > To: Christopher Paolini
> >      > Cc: sciencedmz at attila.sdsu.edu; Witt, Brian K (Brian)
> >      > Subject: RE: Science DMZ - installation requirements checkpoint
> >      >
> >      > Chris,
> >      >
> >      > I don't believe there would be any issues placing the 40GE NI
> >      Module in Slot 5 but I'll defer to Brian Witt?
> >      >
> >      > John Straight
> >      > (310) 944-5675
> >      >
> >      > -----Original Message-----
> >      > From: Christopher Paolini [mailto:paolini at attila.sdsu.edu]
> >      > Sent: Sunday, May 05, 2013 11:44 AM
> >      > To: Straight, John E (John)
> >      > Cc: sciencedmz at attila.sdsu.edu; Witt, Brian K (Brian)
> >      > Subject: Re: Science DMZ - installation requirements checkpoint
> >      >
> >      >
> >      > Thanks John.  I sent revision A to everyone, but Kent and his
> >      staff need to add their comments and send you an updated revision B.
> >       Quick
> >      > question: I have the three 10GE NI modules in slots 1,2,3 of the
> >      OS10K.
> >      > Is it OK if I place the 40GE NI module in slot 5?
> >      > Thanks,
> >      > Chris
> >      >
> >      > Straight, John E (John) <john.straight at alcatel-lucent.com> wrote:
> >      >
> >      > > Chris,
> >      > >
> >      > > Thanks for completing the Installation Requirements Document. I
> >      have yet to hear back from AT&T on the OmniVista delivery but will
> >      check again tomorrow morning.
> >      > >
> >      > > John Straight
> >      > > (310) 944-5675
> >      > >
> >      > > -----Original Message-----
> >      > > From: Christopher Paolini [mailto:paolini at attila.sdsu.edu]
> >      > > Sent: Saturday, May 04, 2013 6:14 PM
> >      > > To: sciencedmz at attila.sdsu.edu; Witt, Brian K (Brian)
> >      > > Cc: Straight, John E (John)
> >      > > Subject: Re: Science DMZ - installation requirements checkpoint
> >      > >
> >      > >
> >      > > Kent, Bob, Tony, and Gene:
> >      > >
> >      > > Kent: I have attached revision A of the LAN Implementation Form.
> >       My answers are given in red font.  Please go through my answers and
> >      add additional detail as you deem appropriate.  I rack mounted the
> >      OS10K Friday (see Figure 1).
> >      > >
> >      > > Bob: I'd like to work with you on Monday to mount one OS6900 in
> >      CSL-121A and one OS6900 in EBA-111.  I met Eric Frost and he has
> >      given us permission to mount an OS6900 in CSL-121A.  We need to
> >      ensure water doesn't leak onto the OS6900 through the fiber conduit
> >      in the event of a rainstorm (Eric mentioned this issue).  We also
> >      need to connect SMF to the SFP-10G-LR ports 1 and 2 in the NI slot 1
> >      module (see Figure 2) that connect back to X2-LR GBICS in Te1/2 and
> >      Te1/3 of the CENIC C4900M switch sd-csu-sw-3 in Admin 12.
> >      > >
> >      > > Tony: Network MailScanner warning: numerical links are often
> >      malicious: 130.191.49.0/24 is now associated with Autonomous System
> >      Number 64760.
> >      > >
> >      > > Gene: I have included an updated Science DMZ Network Internal
> >      Firewall Ruleset in section 5.
> >      > >
> >      > > Thanks everyone,
> >      > >
> >      > > Chris
> >      > >
> >      > >
> >      > > --
> >      > > This message has been scanned for viruses and dangerous content
> >      by MailScanner, and is believed to be clean.
> >      > >
> >      > >
> >      > > --
> >      > > This message has been scanned for viruses and dangerous content
> >      by
> >      > > MailScanner, and is believed to be clean.
> >      > >
> >      > >
> >      >
> >      > --
> >      > This message has been scanned for viruses and dangerous content by
> >      MailScanner, and is believed to be clean.
> >      >
> >      >
> >      > --
> >      > This message has been scanned for viruses and
> >      > dangerous content by MailScanner, and is
> >      > believed to be clean.
> >      >
> >      >
> >      --
> >      This message has been scanned for viruses and
> >      dangerous content by MailScanner, and is
> >      believed to be clean.
> >      _______________________________________________
> >      sciencedmz mailing list
> >      sciencedmz at engineering.sdsu.edu
> >      http://attila.sdsu.edu/mailman/listinfo/sciencedmz
> >
> >    --
> >    Kent McKelvey
> >    Director, Telecommunications and Network Services
> >    Office: 619-594-3245
> >    E-mail: kent at sdsu.edu
> >
> >    --
> >    This message has been scanned for viruses and
> >    dangerous content by MailScanner, and is
> >    believed to be clean.
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>


-- 
Kent McKelvey
Director, Telecommunications and Network Services
Office: 619-594-3245
E-mail: kent at sdsu.edu

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://attila.sdsu.edu/pipermail/sciencedmz/attachments/20130507/50a10f05/attachment-0001.html 


More information about the sciencedmz mailing list