[sciencedmz] Science DMZ - installation requirements checkpoint

[Straight, John E (John)]

Chris,

Thanks for completing the Installation Requirements Document. I have yet to hear back from AT&T on the OmniVista delivery but will check again tomorrow morning.

John Straight
(310) 944-5675

-----Original Message-----
From: Christopher Paolini [mailto:paolini at attila.sdsu.edu] 
Sent: Saturday, May 04, 2013 6:14 PM
To: sciencedmz at attila.sdsu.edu; Witt, Brian K (Brian)
Cc: Straight, John E (John)
Subject: Re: Science DMZ - installation requirements checkpoint


Kent, Bob, Tony, and Gene:

Kent: I have attached revision A of the LAN Implementation Form.  My answers are given in red font.  Please go through my answers and add additional detail as you deem appropriate.  I rack mounted the OS10K Friday (see Figure 1).

Bob: I'd like to work with you on Monday to mount one OS6900 in CSL-121A and one OS6900 in EBA-111.  I met Eric Frost and he has given us permission to mount an OS6900 in CSL-121A.  We need to ensure water doesn't leak onto the OS6900 through the fiber conduit in the event of a rainstorm (Eric mentioned this issue).  We also need to connect SMF to the SFP-10G-LR ports 1 and 2 in the NI slot 1 module (see Figure 2) that connect back to X2-LR GBICS in Te1/2 and Te1/3 of the CENIC C4900M switch sd-csu-sw-3 in Admin 12.

Tony: Network 130.191.49.0/24 is now associated with Autonomous System Number 64760.

Gene: I have included an updated Science DMZ Network Internal Firewall Ruleset in section 5.

Thanks everyone,

Chris


--
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.