[sciencedmz] Science DMZ - installation requirements checkpoint

[Christopher Paolini]

Thanks Brian.  I installed the 40GE NI module in slot 5.  I also spoke
with Bob Osborn and he is going to work on rack mounting the two OS6900s
and connecting SMF to the SFP-10G-LR ports 1 and 2 in the NI slot 1
module that connect back to X2-LR GBICS in Te1/2 and Te1/3 of the CENIC
C4900M switch sd-csu-sw-3 in Admin 12.

Thanks,

Chris

Witt, Brian K (Brian) <brian.witt at alcatel-lucent.com> wrote:

> Hi John-
> 
> Any NI in any NI slot is ok, there are no NI-Slot restrictions.
> 
> Best Regards,
> 
> Brian Witt
> 
> 
> -----Original Message-----
> From: Straight, John E (John) 
> Sent: Monday, May 06, 2013 8:02 AM
> To: Christopher Paolini
> Cc: sciencedmz at attila.sdsu.edu; Witt, Brian K (Brian)
> Subject: RE: Science DMZ - installation requirements checkpoint
> 
> Chris,
> 
> I don't believe there would be any issues placing the 40GE NI Module in Slot 5 but I'll defer to Brian Witt? 
> 
> John Straight
> (310) 944-5675
> 
> -----Original Message-----
> From: Christopher Paolini [mailto:paolini at attila.sdsu.edu] 
> Sent: Sunday, May 05, 2013 11:44 AM
> To: Straight, John E (John)
> Cc: sciencedmz at attila.sdsu.edu; Witt, Brian K (Brian)
> Subject: Re: Science DMZ - installation requirements checkpoint
> 
> 
> Thanks John.  I sent revision A to everyone, but Kent and his staff need to add their comments and send you an updated revision B.  Quick
> question: I have the three 10GE NI modules in slots 1,2,3 of the OS10K.
> Is it OK if I place the 40GE NI module in slot 5?
> Thanks,
> Chris
> 
> Straight, John E (John) <john.straight at alcatel-lucent.com> wrote:
> 
> > Chris,
> > 
> > Thanks for completing the Installation Requirements Document. I have yet to hear back from AT&T on the OmniVista delivery but will check again tomorrow morning.
> > 
> > John Straight
> > (310) 944-5675
> > 
> > -----Original Message-----
> > From: Christopher Paolini [mailto:paolini at attila.sdsu.edu]
> > Sent: Saturday, May 04, 2013 6:14 PM
> > To: sciencedmz at attila.sdsu.edu; Witt, Brian K (Brian)
> > Cc: Straight, John E (John)
> > Subject: Re: Science DMZ - installation requirements checkpoint
> > 
> > 
> > Kent, Bob, Tony, and Gene:
> > 
> > Kent: I have attached revision A of the LAN Implementation Form.  My answers are given in red font.  Please go through my answers and add additional detail as you deem appropriate.  I rack mounted the OS10K Friday (see Figure 1).
> > 
> > Bob: I'd like to work with you on Monday to mount one OS6900 in CSL-121A and one OS6900 in EBA-111.  I met Eric Frost and he has given us permission to mount an OS6900 in CSL-121A.  We need to ensure water doesn't leak onto the OS6900 through the fiber conduit in the event of a rainstorm (Eric mentioned this issue).  We also need to connect SMF to the SFP-10G-LR ports 1 and 2 in the NI slot 1 module (see Figure 2) that connect back to X2-LR GBICS in Te1/2 and Te1/3 of the CENIC C4900M switch sd-csu-sw-3 in Admin 12.
> > 
> > Tony: Network 130.191.49.0/24 is now associated with Autonomous System Number 64760.
> > 
> > Gene: I have included an updated Science DMZ Network Internal Firewall Ruleset in section 5.
> > 
> > Thanks everyone,
> > 
> > Chris
> > 
> > 
> > --
> > This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
> > 
> > 
> > --
> > This message has been scanned for viruses and dangerous content by 
> > MailScanner, and is believed to be clean.
> > 
> > 
> 
> --
> This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
> 
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> 
> 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.